35
Restoring factory settings
8
Restoring factory settings
The device’s factory settings can be restored. If you do this, you will
lose all your settings.
To restore the Keypad’s factory settings, proceed as follows:
•
Remove the Keypad
(B)
from the wall bracket
(A),
by inserting a
thin object into the hole on the bottom of the wall bracket and
releasing the latch
(M)
(see figure 3)
.
•
Open the Keypad’s rear battery compartment
(J)
by loosening
the screw on the battery compartment cover
(see figure 4)
.
•
Remove one battery.
•
Insert the battery with the correct polarity
and press and simulta-
neously hold down the system button
(H)
for 4 seconds, until the
LED
(G)
starts rapidly flashing orange
(see figure 9)
.
•
Release the system button.
•
Press and hold down the system button again for 4 seconds, until
the LED
lights up green
(see figure 10)
.
•
Release the system button again to conclude the procedure.
The device will perform a restart.
9
Maintenance and cleaning
The device does not require you to carry out any maintenance oth-
er than replacing the battery when necessary. Enlist the help of an
expert to carry out any repairs.
Clean the device using a soft, lint-free cloth that is clean and dry. Do not
use any detergents containing solvents, as they could corrode the plastic
housing and label.
Содержание 156424A0
