49
Restore factory settings
11
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the motion detector,
please proceed as follows:
• To remove the electronic unit
(B)
of the motion
detector from the frame, take hold of the sides
of the electronic unit and pull it out
(see figure 6)
.
• Remove the batteries.
• Insert the batteries ensuring that the polarity is
correct
(see figure 7)
while pressing and holding
down the system button
(E)
for 4 seconds at the
same time, until the LED will quickly start flashing
orange
(see figure 5).
• Release the system button again.
• Press and hold down the system button again for
4 seconds, until the LED lights up green.
• Release the system button to finish the proce-
dure.
The device will perform a restart.
Содержание HmIP-SMI55-2
Страница 3: ...1 G A B E F D C ...
Страница 4: ...2 3 H I K J K J ...
Страница 5: ...4 5 L ...
Страница 6: ...6 7 ...
