Homematic IP HmIP-FSI16, Инструкция по установке и эксплуатации

Страница: 42 / 51

42
Start-up
To integrate the device into your system and enable it to
communicate with other Homematic IP devices, it has to
be connected to your Homematic IP Access Point first.
To teach-in the device, please proceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item
“Teach-in device” .
• After installation, the teach-in mode remains
activated for 3 minutes.
If the 3 minutes have expired, disconnect and
reconnect the mains voltage to start the teach-in
mode again (
see figure 6 ).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Wait until the connection is completed.
• If connecting was successful, the LED
(A) lights
up green. The device is now ready for use.
• If the LED lights up red, try again.
• Select, in which application (e.g. light control)
you would like to use the device.
• In the app, give the device a name and allocate
it to a room.