Homematic IP HmIP-FSI16, Инструкция по установке и эксплуатации

Страница: 38 / 51

38
Start-up
• The “5 safety rules” to be used:
Disconnect from mains; Safeguard from switching on
again; Check that system is de-energised; Earth and
short circuit; Cover or cordon off neighbouring live parts;
• Select suitable tool, measuring equipment and, if
necessary, personal safety equipment;
• Evaluation of measuring results;
• Selection of electrical installation material for
safeguarding shut-off conditions;
• IP protection types;
• Installation of electrical installation material;
• Type of supply network (TN system, IT system, TT
system) and the resulting connecting conditions
(classical zero balancing, protective earthing, required
additional measures etc.).
Installation may only take place in normal
commercial switch boxes (device boxes) in
accordance with DIN 49073-1 or surface-
mounting boxes in accordance with DIN 60670-1
(e.g. Abox 025 or Abox 040).
The circuit to the which the device and the load
will be connected has to be secured by a cable
protection switch in accordance with EN60898-1
(tripping characteristic B or C, max. 16 A rated
current, min. 6 kA interrupting rating, energy
limiting class 3). Installation regulations according
to VDE 0100 and HD382 or 60364 have to be
considered.