Homematic IP HmIP-BBL-2, Инструкция по установке и эксплуатации

Страница: 37 / 46

35
Start-up
Step 2 If necessary, pull the rocker off the frame
of the relevant switch. Then pull the frame
off the switch together with the clamping/
retaining piece. The clamping/retaining
piece can be transparent, grey or black
depending on the manufacturer, and holds
the frame onto the switch.
To make removal easier, a flat, pointed
object such as a slotted screwdriver can
be used.
Step 3 Release the wiring and remove the existing
switch if necessary.
Step 4 Connect the switched phase conductors
for connecting terminals 1 and 2 to the
motor as follows (
see fig. 2 ):
Connecting terminal 1 (C) : “Down”
Connecting terminal 2
(D)
: “Up”
Step 5 Connect the phase conductor to connect-
ing terminal L
(B) .
Step 6 Connect the neutral conductor to con-
necting terminal N
(E) .
Step 7 Connect the neutral conductor of the mo-
tor to the neutral conductor of the house
installation.