2
7
The following symbols need to be observed:
= An exclamation mark in a triangle indicates important notices in these operating
instructions that must be observed under all circumstances.
= A lightning symbol warns of a risk of an electric shock or the impairment of the appliance’s
electric safety.
•
You may only use a (120V, 60 Hz) socket of the public supply net for the supply of the power
packs. Never attempt to operate the appliances with a different voltage.
•
Make sure that all electric connections and connection cables between the devices of the
camera system as well as the devices to be connected meet the pertaining regulations and are in
conformity with the operating instructions.
•
In commercial institutions, make sure you observe the accident prevention regulations of the
commercial trade organization for electric installations.
•
In schools, training facilities, hobby and self-help workshops, qualified personnel needs to
supervise the operation of electronic devices.
•
Also observe the safety notices and operating instructions of the other appliances connected to
the system.
•
Please contact an expert in case you have any doubts about the mode of operation, the safety or
connecting the appliances.
•
Do not operate the devices unsupervised.
•
When opening the covers or removing parts except where possible by hand, you may expose
live parts. Connections may also be live. Prior to aligning, cleaning, service or repair work or
exchanging parts or modules, you must separate the appliances from all power sources if you
need to open them. Only an expert familiar with the risks and the pertinent regulations may repair
or maintain an open live appliance.
•
Never plug-in or unplug the power packs with wet hands.
•
Never tug on the power cords of the power packs, use the plug to unplug it from the wall socket.
•
Always unplug the power packs from the wall outlet during thunderstorms.
•
Make sure that the power cables do not get squashed or damaged by sharp edges when
installing the devices.
•
Never replace damaged power cables yourself! In such a case, remove them and take the
devices to a workshop.
Maintenance
The devices are maintenance-free, so never disassemble them. The guarantee becomes void when
you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to
cleaning, unplug the devices from all voltage sources.
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These attack the
surfaces of the devices. Besides, the vapors are hazardous to your health and explosive. Do
not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
Technical Data
Camera
Receiver
Operating voltage
7.5V DC
7.5V DC
Current consumption
300 mA
300 mA
Transmitting frequency
2.4-2.4835Ghz
2.4-2.4835Ghz
Modulation
FM
Channels
2
2
Light sensitivity
8-20 Lux
Video output level
1 Vp-p / 75 Ohm
Audio output level, mono
1 Vp-p / 600 Ohm
Audio/Video Connection Jacks
AV jack
Picture sensor
1/4” CMOS color
656x492 (NTSC)
Resolution
450 TV lines (horizontal)
Microphone
mono
Picture
Color
Range
approximately 100 m in clear visibility
Operating temperature
14 to 122˚F / -10˚C to 50˚C
Mass approx. (without tripod)
180g
209g
Dimensions (without aerial)
L x W x H
2
1/4
x 1
3/4
x 1
3/4
”
57 x 44 x 45 (mm)
L x W x H
4 x 3 x 1”
100 x 78 x 24 (mm)
Plug-in power units
Operating voltage
120V / 60Hz
120V / 60Hz
Output voltage
7.5V DC / 300 mA
7.5V DC / 300 mA