Homeguard HGWVD-730, Руководство пользователя

Страница: 5 / 14

After powered on, the indoor unit makes two dingdong sound, the key light will be on
and go out after 2 seconds.
Note: Please plug in the indoor unit in the socket 5 meters away from the router.
英
6
Step 4: Take the outdoor unit together with the indoor unit(within two meters), make
sure they are commnucating with each other. After finish all the settings, we can
install it to the door or wall.
Note: The indoor and outdoor units have been paired when out of factory, which
can be confirmed by the following methods: Short press the outdoor unit, if the
indoor unit rings and the white light on the outdoor flash once, that means the
indoor and outdoor units have been successfully paired.
If the indoor unit does not ring and the outdoor unit make beep sound, that
means they are not paired, and the code matching should be re-conducted
according to the method in the "Code Pairing" section below.
Step 5: If the indoor and outdoor units are successful paired, and all the indicator
lights funciton normally, please jump to the " Add the doorbell to mobile phone
APP " section and start to configure WiFi for the doorbell.
V. Reset and Code matching
1. Reset(Re-configure the WiFi network)
Power on the indoor unit, long pressing the function key for 3~5 seconds, it will make
doorbell sound. After release the funciton key, the red indicator will flash once per
second, which means it has been reset successfully.
Note: If the indicator does not flash once per second, please reset it again by
referring to the guide above.