Instructions for Use
For Use in Home or Office
1. Plug adapter into a 120 volt AC outlet and plug the receptacle end into the
input jack, located along the side of the cushion.
2. Attach the massage cushion to any chair using the integrated strapping
system to secure the cushion.
3. Slide the Targeted Massage Button(s) to Lo or Hi (Fig. 2).
4. To activate heat function, press the heat button once (Fig. 2). Press the
heat button again to deactivate the heat function. Note: When selecting
the heat feature, there will be a slight decrease in the strength of the
massage output. This adjustment is perfectly normal and should not be
interpreted as a defect.
5. To turn the unit off, slide the Targeted Massage Button(s) to Off.
For Use in Your Car
1. Simply plug the 12 volt auto adapter into a 12V DC outlet and plug the
receptacle end into the input jack, located along the side of the cushion
2. Slip the massage cushion straps over your seat.
3. Follow steps 3-5 above for operation.
Maintenance
To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact with
sharp edges or pointed objects which might cut or puncture the fabric
surface. To avoid breakage, do not wrap the power cord around the unit. Do
not hang the unit by the controller cord.
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a soft,
slightly damp sponge. Never allow water or any other liquids to come into
contact with the unit.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass/furniture
polish, paint thinner to clean.
• Do not attempt to repair the massager. There are no user serviceable parts.
For service, call the Consumer Relations telephone number listed in the
warranty section.
NOTE:
This unit is equipped with a protective thermostat that will shut off
the heating element if it overheats. If you suspect your unit overheats, unplug
the unit and let it cool for 30 minutes before plugging it in again and
continuing use.
4
5
Please Note:
For your safety, this
product is equipped
with a pressure
activated switch
to control the heat
function.
Heat will
not operate unless
pressure is applied
to this switch,
located on the seat
cushion of the unit
(see Fig. 1, pg.
5). Once pressure
is removed, heat
will turn off. After
applying pressure,
please allow 5-10
minutes for heat
to reach maximum
temperature.
Please Note:
Not recommended
for use on wooden
surfaces as
the zipper may
damage the wood.
Caution is also
recommended
when using on
upholstered
furniture.
Power Adapters
This massager is powered by a
custom 120 volt AC home adapter,
and 12 volt DC auto adapter
(Cigarette lighter plug-in style).
Both are included with your unit.
On/Off
Before connecting power source,
be sure the controls are in the
far left position. Select L or H to
activate the cushion and select
a zone to begin the massage
function. To choose the intensity of
your massage, adjust the strength
for L to H. Slide the power switch
to customize the intensity. To turn
the power off, slide the switch to
the far left position and the LED
will turn off.
Targeted Massage Buttons
Zone buttons activate vibration
motors to massage specific areas:
upper back, middle back, lower back
and seat. Customize your massage
by choosing one specific area, any
combination of areas, or all four at
once. To select a massage area,
simply slide the button to the right
and the corresponding LED light
will illuminate. To deselect, simply
slide the button to the far left and the
corresponding LED light will turn off.
Heat
Soothing, penetrating heat is
activated by pressing this button.
To turn off heat, simply press the
button again. The glowing LED light
indicates that heat is on.
PLEASE NOTE:
The heat option will only work
while a massage feature is
selected.
Pressure
Activated
Switch
Soothing
Heat
Fig. 2
Fig. 1
6 Vibration
Massage
Motors
