9
10
Listening to the Radio
NOTE:
For best reception, fully unwind the wire antenna. DO NOT strip, alter or attach
to other antennas.
1. To listen to the radio, press the POWER button located on top of the unit.
2. Press the RADIO button on the unit until FM icon and station frequency appears on
the display.
3. Use the TUNER selector button on the top of the unit to select desired station. For
auto seek press and hold TUNER selector for 2 seconds then release and the tuner
will find the next station with a signal.
4. Press the POWER button to turn radio off.
Sounds
1. To listen to the Nature Sounds, press the POWER button on the top of the unit.
2. Press the SOUND button to scroll through the sounds.
3. Your sound selection will illuminate on the LCD screen.
Sleep Feature
While listening to the radio press the SNOOZE/DIM/SLEEP button to activate the sleep
feature. This allows you to set a sleep timer for 15, 30, 45, and 60 minutes. Once set,
the unit will continue playing for the set length of time, then will automatically turn off.
Projector Function
The Sound Spa is equipped with a feature that allows you to project the TIME on any
flat surface.
1. To turn projector on, press the PROJECTOR button on back of unit.
2. Carefully move the PROJECTOR device up or down to change where the image
gets projected.
3. To adjust the focus, carefully turn the round end of the projector lens to the desired
focus.
4. Press the PROJECTOR button to turn off.
Volume Control
To adjust the volume, use the VOLUME buttons located on the top of the unit.
Display Dimmer Control
Press the SNOOZE/DIM/SLEEP bar to adjust the backlight intensity of the clock
display. The POWER selector button needs to be off to use the dimmer control.
Backup Battery
This alarm clock is equipped with a battery backup feature (1 CR-2032 battery
included and already installed) to keep the clock time and alarm settings during power
outage. The battery is located on the bottom of the unit for easy access (small Phillips
head screw driver required, not included).
Maintenance
To Store:
You may leave the unit on display, or you can store it in a cool, dry place.
To Clean:
Use only a soft dry cloth to clean the enclosure of the unit.
NEVER
use liquids or abrasive cleaner to clean.
FCC Disclaimer
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by HoMedics could void the user’s
authority to operate the equipment.
