7
8
Setting Clock Time
Press and hold (3 seconds) the TIME SET button on back of unit (Fig. 2), the hour will
begin to flash. Select the hour using the VOLUME buttons on the top to adjust the hour
(when in 12 hour mode remember to set correct AM/PM, a “PM” icon will be displayed)
(Fig. 1), press TIME SET button again to select the minute using the VOLUME buttons
on top again to adjust. Press TIME SET button again, now time is set.
NOTE:
After time is set, press TIME SET button again and use the VOLUME button to
select 12 or 24 hour format.
Setting and Using the Alarms
Setting Alarm 1 or Alarm 2
1. Press and hold (3 seconds) the desired alarm button (ALARM 1 or ALARM 2)
located on the top of the unit to activate the alarm set feature. (Fig. 1)
2. Press and hold the ALARM button again and the hour will begin flashing.
3. Use the TUNER button (or the volume up/down button) on top of the unit to adjust
the hour, paying attention to the AM and PM indicators (when in 12
hour mode).
4. Press the ALARM button again and the minute will begin flashing. Use TUNER
button again to adjust the minute.
5. Press the ALARM button again to select the source. The alarm can be set to sound
a Beep, Nature Sounds or play the FM radio. Select using the TUNER button.
6. Press ALARM button again to adjust the maximum volume of the gradual wake
feature (alarm begins soft and slowly gets louder) by using the TUNER buttons to
adjust the sound level up or down.
7. Press the ALARM button a final time, the alarm is now set.
Turning Off The Alarm / Snooze Operation
The Sound Spa is equipped with gradual wake, which means that the alarm begins
soft and slowly gets louder. This will ensure a non-jarring wake-up.
• After the alarm sounds, press the SNOOZE bar located on the top of the unit and
the alarm will sound again after nine minutes.
NOTE:
You may only press the SNOOZE button during the ALARM mode for one
hour (7 times). After the seventh time, the alarm will turn off and will not sound again
until the next set time.
• To turn off the alarm, press any button (except the SNOOZE/DIM/SLEEP button) on
the top of the unit.
FIGURE 1
Snooze | Dim | Sleep
Tuner
Volume
Radio
Sounds
Alarm 1
Alarm 2
Power
VOLUME
SOUNDS
POWER
SNOOZE | DIM | SLEEP
ADAPTOR
ALARM 1
RADIO
TUNER
ALARM 2
TIme Set
Projector
DC5V
FIGURE 2
PROJECTOR
TIME SET
PROJECTOR
ON/OFF
BUTTON
ADAPTOR
INPUT
