4
5
INSTRUCTIONS FOR USE
This Shiatsu Massage Cushion comes with a screw located on the back of the unit to protect the massage
mechanism during shipment. This screw must be removed before the first use to allow the massage feature to
function. Use the provided Allen wrench. Then, properly dispose of the screw.
Warning: Failure to remove screw may cause permanent damage to the massage cushion.
1. Un-tie cord strap, extend cord and insert plug into household electrical outlet to power unit.
2. Attach the cushion to most chairs for a luxurious massage as you read, rest or even work. See page 5 for
instructions on the use of the controls.
Strapping System
The Massage Cushion incorporates a unique strapping system which allows you to fasten it to almost any chair.
Just slip the straps over the seat or chair and adjust fastening straps to secure. Your massager won’t slip or slide
away.
Maintenance
To Store
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects which
might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the unit.
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge. Never allow
water or any other liquids to come into contact with the unit.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, gasoline, kerosene,
glass / furniture polish or paint thinner to clean.
• Do not attempt to repair the Massage Cushion. There are no user serviceable parts. For service, call the
Consumer Relations telephone number listed in the warranty section.
1
1
2
3
2
3
Moving massage mechanism
L.E.D. will illuminate red when
heat is turned on.
The actual product materials and fabrics
may vary from the picture shown.
Power Button
To turn on the massage functions, first press the
POWER button. The L.E.D. indicator will illuminate
and confirm your selection. To turn off the
massage functions, simply press the button again.
The L.E.D. indicator will blink while the Shiatsu
massage mechanism returns to its lowest point
and then it will turn off.
Mode Button
Choose from 3 preset programs where the
massage travels up and down in a specific area
of the back, either Full Back, Upper Back or
Lower Back. To select a program, simply press
the Mode button and the L.E.D. will illuminate
the active program. Continue to press the Mode
button until the desired program is selected.
Heat Button
For soothing heat when the massager is
on, simply press the heat button and the
corresponding red L.E.D. light will illuminate.
To deselect, press the button again and the
corresponding L.E.D. light will turn off. For your
safety, heat cannot be turned on if massage is
not selected.
Kneading Massage
Shiatsu is a deep kneading circular massage.
This unit features a massage mechanism that
travels up and down the back of the cushion.
NOTE: When “POWER” button is pressed for
first-time use, the moving mechanism will
automatically move to the lowest position before
starting a massage program.
After initial use, mechanism will always park
at lowest position. See note below regarding
parking.
NOTE: The moving massage mechanism always
“parks” or finishes in its lowest position. It
will continue to this position after the power
has been turned off. If the electrical supply
is interrupted, when power is restored, the
mechanism will “park” or move to its lowest
position.
NOTE: There is a 15-minute auto shut off on the
unit for your safety.
