5
1. Screw the desired massage head into the socket on the front of the product.
2. Turn the speed selector ring on the base of the product clockwise to your required speed setting, the speed indicator
LED(s) on the back of the product will illuminate corresponding to the speed chosen.
3. Gently move the massage head over the part of the body you wish to massage at first and then apply more pressure
as desired. If you have not used this type of product before it is recommended that you start on level I speed and press
gently as the product provides an intense massage.
4. If you wish to increase or decrease the speed of the massager, turn the speed selector ring accordingly.
5. Once you are finished with your massage, turn the speed selector ring to the 0 position to turn the massager off.
USING THE HEATED HEAD
1. Screw the heated head into the massager.
2. Turn the speed selector ring to the desired speed.
3. Start massaging, the head will take 2 mins to get to full temperature, whilst the head is heating the LED’s will flash. Once
the LED’s stay lit, the head is at full temperature.
4. Once you are finished with your massage, turn the speed selector ring to the off position and allow the head to cool
before putting back into the case.
USING THE COLD HEAD
1. Place the cold head in a freezer for at least 4 hours or until fully frozen.
2. Screw the cold head into the massager.
3. Turn the speed selector ring to the desired speed.
4. Once you are finished with your massage, turn the speed selector ring to the off position and remove the cold head,
placing it back into the freezer if desired.
5. Do not store the cold head in the case if it is damp due to condensation from recent use.
CHARGING YOUR DEVICE
1. To charge the product, plug the adaptor into a 220-240V mains outlet and connect the cable to the charging socket on
the bottom of the handle
2. Once the charging cable is connected the charge indicator LED’s should start to flash, this will indicate the product is
charging.
3. The product will require 2.5 hours of charging for up to approximately 3.5 hours of use. The heating head will remained
charged for approx 2.5 hours
4. Once the product is fully charged the indicator lights will remain fully illuminated.
5. Disconnect the product from the mains power supply once it is fully charged.
CLEANING YOUR DEVICE
MAKE SURE THE DEVICE IS UNPLUGGED FROM THE MAINS SUPPLY AND ALLOW TO COOL BEFORE
CLEANING. CLEAN ONLY WITH A SOFT, SLIGHTLY DAMP SPONGE.
• NEVER allow water or any other liquids to come into contact with the appliance.
• DO NOT immerse in any liquid to clean.
• NEVER use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
INSTRUCTIONS FOR USE:
