HoMedics NEWA, Руководство пользователя

Страница: 9 / 18

8
2
Storage Bag
The storage bag has been specially designed for a convenient storage of
your Newa while traveling.
Storage Case
The storage case has been specially designed for convenient, permanent
storage of your Newa, Power supply, Newa activator gel and Instructions folder.
HOW TO USE YOUR NEWA
TREATMENT PROCEDURE
The goal of the treatment is to apply heat to the deeper layers of the skin and maintain this
level of temperature for several minutes.
FIRST TIME USE
Step 1 – Prepare the Newa Device
Make sure the Switch is off (”0” mode) before plugging it into the electrical outlet.
Connect the electrical outlet adaptor to the power supply provided (according to
the instructions on the power supply box) and plug it into your electrical outlet.
Step 2 – Try Your Newa
When using your Newa for the first time, we recommend that you try it on your
forearm first so you will learn what feeling you will experience during treatment.
• Move the switch to “2” mode. The LED should emit a steady
light signaling it is connected to the main power.
• Apply the Newa activator gel on your forearm.
• Press and release the power button. The LED will start blinking.
• Move the Newa device in a circular movement on your forearm. You should
feel a warm pleasant sensation.
• Once you get the feeling, you don’t have to finish 4 minutes of treatment on your
arm. Stop the energy delivery by pressing the power button and start treating
your face according to the instructions below.
Step 3 – Adjust Treatment Level
The Newa device has 2 treatment levels: High and Low. We recommend you
start with the “High” setting (”2” mode), however, if you find the sensation too
uncomfortable, you may select the lower setting.
To change the treatment level, if there is energy delivery (LED is blinking),
press and release the power button to stop energy delivery, then remove the
Newa device from the skin and change the Switch to mode “1”.