HoMedics NEWA, Руководство пользователя

Страница: 10 / 18

9
3
4
1
2
5 6
0
EVERY TIME USE
Step 1 – Turn Newa Off
Make sure the switch is in “0” mode, meaning it is powered off.
Step 2 – Connect Newa to Electrical Outlet
Connect the electrical outlet adaptor to the power supply provided (according to
the instructions on the power supply box) and plug it into your electrical outlet.
Step 3 – Prepare Yourself for the Treatment
1. Remove all jewelry from the treatment areas. This includes among others
earrings, necklaces or rings.
2. Using non alcoholic cleaning pads, clean your face thoroughly and
dry it. Make sure all make up has been removed from the treatment
3. Divide your face into up to six “treatment areas”as depicted in figure.
4. Each treatment area will be treated for 4 minutes which should be sufficient
to create enough heat and to maintain it.
After 4 minutes, the energy delivery will stop aoutomatically
and you will feel a vibration.You may stop the treatment at anytime
by pressing the power button and removing the Newa device
from your skin.
5 . You may treat any of these six areas according to your needs and comfort
Step 4 – Applying Newa Activator Gel
• Apply two ”lines“ of the Newa activator gel directly on the electrodes area.
You should not use any other product with the Newa device.
• Make sure that the Newa activator gel quantity is enough to cover the
active tip area as seen on the image.
Step 5 – Prepare the Treatment Area
•
Gently place the Newa active tip area on the treatment area.
With a circular motion, spread the Newa activator gel from
the center to the borders of the treatment region.
• Only after you have covered the treatment area with the
Newa activator gel, move to the next step.
Step 6 – Prepare Newa for the Treatment
• Move the switch to “2” mode.
• The device is ready for the treatment.