HoMedics Hydragel HG-22-2EU, Инструкция по эксплуатации

Страница: 6 / 48

6
G
B
INSTRUCTIONS FOR USE:
Changing Attachments
ALWAYS ensure the appliance is switched off before changing any
attachments. To change the attachments, simply twist off
(anti-clockwise) the massage head that is attached to the unit and
twist on (clockwise) the desired head. (See Figure 1)
Massage Function
NOTE: Always ensure the appliance is set to the ‘OFF’ before
inserting the plug into a mains outlet.
1. Plug the appliance into a 220-240V mains outlet and switch on.
2. Slide the power switch upwards to start the massage. Slide up one (I) position for low intensity setting and
two (II) positions for high intensity setting.
3. Apply the massager head lightly to the area you wish to treat. Move the unit slowly, holding it over the
targeted area. Treat the area for a short period of time and move to another area. NEVER treat the same
area for longer than 3 minutes.
4. To turn the unit off, slide the power switch downwards to the ‘OFF’ position.
Heat Function
1. Attach the soothing heat massage head as described in the ‘Changing Attachments’
section above.
2. First activate the massage function as described above. Then slide the ‘Heat’ switch upwards to active the
heat. Allow a few minutes for the heat to fully activate.
3. To turn the heat off, slide the switch downwards to the ‘OFF’ position.
NOTE:
• To eliminate risk of being burned, only use the heat function with the soothing heat attachment.
• The Heat function will only work when the massager is in use.
• DO NOT use the massage or heat functions continuously for more than 20 minutes.
• DO NOT use the massager directly on one concentrated area of the body. Massagers are designed to be
used in a continuous motion, constantly changing the massage area.
(Figure 1)
IB-HG22-0410-01 6/4/10 16:10 Page 6
All manuals and user guides at all-guides.com
all-guides.com