Figure 3
6
7
Step 2
Locate the seat cushion (Fig. 3), slide the metal frame into the
pocket on the back of the cushion and line up with the adhesive
strips (Fig. 2). To raise the footrest, pull the lever on the left side of
the chair outward.
Step 3
Locate the back cushion (Fig. 4), line up the adhesive strips along
the back of the chair and place the cushion on the chair (Fig. 2). It
may be easiest to recline the chair back when putting the cushion
into place. To recline, locate the lever on the right side of the chair
and pull outward. Tuck in the base of the back cushion to align with
the seat cushion. Note: You may attach the optional headrest (Fig. 8)
by lining up the adhesive strip located on the back of the chair frame.
Step 4
Unwrap the cord to the hand control and adaptor. Locate the plug
jack on the back of the massage chair (Fig. 5). Make sure the
power switch is in the “off” position. Now plug the cord into the
receptacle and place the hand control against the magnetic plate
on the right side of the chair. This is where you may store your
remote.
Step 5
Plug the adaptor into a grounded 120-volt outlet. This product is
equipped with a grounded plug and should only be used with the
appropriate outlet. Once all pieces of the massage chair are in
place and the main power line is plugged in, you may turn the
power switch on (Fig. 5).
The Haven massage chair also includes an electrical outlet with a
300 maximum wattage (Fig. 5).
NOTE: The outlet is an added
convenience for use with items such as a laptop computer or
reading light. It will not power the chair.
Enjoying Your Chair and General Use
Choosing a Location
It is important to choose a location that will allow you to best enjoy
the chair’s benefits. The following is required for the massage
chair:
• The chair back should be a minimum of 2.5 feet from the nearest
object to recline fully.
• An electrical outlet that is a maximum of 8 feet from the chair.
In addition, we would suggest you consider the following for your
massage chair location:
• Choose a low traffic area so you can create a peaceful environ-
ment when getting your massage.
• Choose a location in your home that makes you feel the most
comfortable and relaxed, but is also convenient.
• Adjustable lighting near the chair allows you to create the right
setting for your mood.
Moving Your Chair
Once you have selected the location for your chair, you can easily
move it with the convenient wheels located on the back legs of the
chair (Fig. 6).
To move your chair, stand behind the chair and tilt it backwards
until the wheels are engaged. Then simply push your chair to the
location you want. When you are lowering the front of the chair in
the spot you want it, be careful not to drop it too hard or fast, as it
may cause damage to your floors.
Turning On Your Chair
The Haven massage chair has a master power switch that must be
in the “on” position in order to work. Once you have plugged the
chair power cord into the electrical outlet, turn on the master power
switch located on the back of the chair (Fig. 7).
Adjusting the Chair Cushions
and Recline Systems
Your Haven massage chair cushions and recline angles can be
adjusted to provide the most comfort while you are just sitting or
getting a massage. Changing the arrangement of cushions and
the recline angle of the backrest and footrest adjusts the intensity
and range of the massage along your back.
Adjusting the Cushions
There are two adjustable cushions that are included with your chair:
the headrest pillow and the backrest softening pad.
THE HEADREST PILLOW:
The headrest pillow is designed to support your head and neck
while sitting and relaxing (Fig. 8). When you are using the massage
functions, you may need to move or remove the headrest pillow to
feel the massage in the upper shoulder or neck area. The headrest
attaches with adhesive strips and is easily adjusted.
THE BACKREST SOFTENING PAD:
Your massage chair comes with the backrest softening pad includ-
ed (Fig. 9). It is recommended that you have this softening pad
installed for the most comfort while just sitting in the chair. In addi-
tion, it is recommended that you use the softening pad while using
the product until your body is “used to” the intensity of the mas-
sage. Once you are comfortable with it, you may want to increase
the intensity of the massage by removing the softening pad. This
will allow you to experience a deeper, more therapeutic massage.
To install the softening pad, remove the back cushion and locate the
zipper in the lower back portion. Unzip this and insert the softening
pad into the pocket. Close the zipper and replace the back cushion.
Handset
plug
Electrical
outlet
Main power
on/off
Figure 2
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Seat cushion here
Back
cushion
here
Fuse
