HoMedics Duo Salon IPL-SLN500K-EU, Инструкция по эксплуатации

Страница: 13 / 100

DUO SALON | 13
GB
Recommended treatment schedule
Initial recommended treatment should consist of 4 to 6 treatments, spaced 2 weeks apart.
Thereafter, occasional touch up treatments can be made as required (also spaced at least
2 weeks apart). Spacing treatments any closer than this will not improve the results but
may increase the risk of adverse side effects.
Aftercare
If there is any redness or irritation immediately after treatment, the area should be
soothed by applying an ice pack wrapped in a clean towel for up to 15 mins, repeating
every 1-2 hours as required. An aloe vera gel or unperfumed aftersun product can also
be applied to help soothe the skin. If irritation persists then a 1% hydrocortisone cream
(available from pharmacies) can be applied sparingly twice a day for up to 3 days.
Until redness subsides, avoid hot baths & showers and any activity that would usually
cause flushing.
Always wait for any skin irritation or redness to subside before applying any other lotions,
creams, deodorant, moisturiser or cosmetics to the treated areas. If necessary, use
products that are unperfumed or suitable for sensitive skin.
For at least 2 weeks after an IPL treatment, either avoid UV exposure completely or limit
exposure and protect the treated areas with a high factor sunscreen (SPF 30+).
Cleaning and storage
Always switch off and unplug and allow the unit to cool before starting cleaning.
Clean the crystal glass treatment window and the facial adapter after use by wiping with a
soft, clean, dry cloth.
Keep duo Salon dry. Never use chemical cleaning products.
Store the device in a dry dust-free environment between 0oC and 60oC
Troubleshooting
Note: If you experience any problems with the device, please refer to below information
to try to resolve it. If the device does not trigger a pulse.
• Make sure that the power cord is plugged properly into the base unit and the electrical
outlet. Then ensure the power switch is on (in the I position).
• Verify there is full contact with the skin. The pulse button will activate a flash pulse only
when the whole of the treatment window is in contact with the skin.