HoMedics Duo Salon IPL-SLN500K-EU, Инструкция по эксплуатации

Страница: 11 / 100

DUO SALON | 11
GB
Body treatments
Duo Salon can be used to treat most areas of the body, but intimate areas (eg genitals,
nipples, anus) must be avoided.
Please refer to Facial Treatments section for specific advice on treating the face.
Before first treatment of a new area, always carry out a Patch Test to assess
suitability and to determine the best power level for your skin. Wait 48hours to
assess the Patch Test area and then do not retreat the same area within 7 days of the
patch test.
Prepare the treatment area by shaving then washing and drying thoroughly. (See
Preparing the Area to be Treated )
Set up Duo Salon for use (see Setting up DUO SALON) ensuring the switch on the base
unit is set to position I.
Press the power button to turn on the device. Wait for the blue LED indicator for level 1 to
illuminate.
Press the power button as required to set the power level determined by your patch test.
The green status light on the applicator head will flash rapidly.
In AFT FreeGlide mode (levels 1 & 2)
Place the crystal glass treatment window on the area to be treated, making full contact
with the skin. The status light should stop flashing and show a steady green light, to
indicate skin contact is made.
Hold the pulse button down and immediately start to move the window slowly across
the skin, maintaining constant contact. A flash will be emitted at regular intervals all the
time that you hold the button down and keep contact with the skin. You will also hear
a popping sound with each flash. Keep the treatment head moving, passing over the
treatment area up to 5 times to ensure maximum coverage.
NOTE: The rate of movement across the skin can be adjusted in line with the flash rate for
a more even coverage, i.e. by moving faster on level 1 and slower on level 2.
In Single Shot mode (levels 3, 4 & 5)
Place the crystal glass treatment window on the area to be treated, making full contact
with the skin. The status light should stop flashing and show a steady green light, to
indicate skin contact is made.
Press the pulse button once. A single flash will be emitted and you will hear a popping
sound. Move the treatment head to the next patch of skin taking care not to overlap. Wait
for the status light to be steady green, then press the pulse button again.
Body Area Comfortable Energy Level