HoMedics Deep Sleep Revitalize HDS-3000, Инструкция по эксплуатации

Страница: 8 / 42

8
5. Short press “CLOCK” to confirm. The minutes will begin flashing.
6. Press /- or track / to choose the minutes.
7. Short press “CLOCK” to confirm. The clock is now set.
NOTE: To exit clock setting mode at any time, either long press the “CLOCK” button or wait for 10
seconds.
SETTING THE ALARM
Deep Sleep
®
Revitalize has 2 alarm settings so you can set 2 different wake-up times. When
setting each alarm, you’ll set the alarm time and corresponding wake sound and volume.
1. Long press the alarm 1 button. 12:00 AM will flash on the screen.
2. Press /- or track / to choose the hour. (In the 12-hour format, continue cycling
through the hours to choose between AM or PM.)
3. Short press the alarm 1 button to confirm. The minutes will begin flashing.
4. Press /- or track / to choose the minutes.
5. Short press the alarm 1 button to confirm. “SOUND” will begin flashing.
6. Press /- or track / to choose a wake sound.
7. Short press the alarm 1 button to confirm. “VOLUME” will begin flashing.
8. Press /- or track / to choose the volume.
9. Short press the alarm 1 button to confirm. Alarm 1 is now set.
10. Repeat for alarm 2 if desired.
When the alarm sounds you may:
•
SNOOZE
: Press the “SNOOZE” button. Your sleep time will be extended by 10 minutes.
• RESET : Turn the alarm off by touching the play/pause button on the front of the device.
The alarm clock will automatically reset for the next day in its current mode. The alarm bell
icon will remain displayed to indicate the alarm is set.