17
Time Adjustment
1. To adjust the date/time in the monitor, press the
key
.
The display will show a blinking number showing the date.
2. Change the date by pressing the
“
” Key
. Each press will
increase the number by one in a cycling manner. Press the
key
again to confirm the entry, and the screen will show a blinking
number representing the date.
3. Change the month, the hour, and the minute as described in Step 2
above, using the
“
” Key
to change and the
key
to confirm
the entries.
4. A
“0”
will reappear as the Blood Pressure Monitor is ready for
measurement again.
16
Clearing Values from Memory
1. Press the
User-Switching key
to select memory zone 1 or memory
zone 2.
2. Continue to press the
“M”
key for approximately 5 seconds, then the
data in the pre-designated memory zone can be erased
automatically.
NOTE : The data in both memory zones (zone 1 and zone 2) can be
erased if any of the batteries is moved away from the socket.
(Suggest the users to first record the data on the Blood Pressure Log
before replace or move away the batteries.)
3
Press “M” Key
for 5 seconds
to clear all
memories
Press the
key
blinking date
increasing date
confirm the entry
