15
Recalling Values from Memory
1. The Monitor has two Memory Zones
(1 and 2).
Each zone can store up
to 50 measurements.
2. To read memory values from a
selected Memory Zone, use the
“User-Switching Key”
to select a
Memory Zone (1 or 2) from which
you want to recall values from.
Then, press the
“M”
key, and the
values will be shown on the LCD
display with an assigned memory
sequence number.
3.
The monitor will display an
average of the previous
measurements first.
Every new
press of the
“M”
key calls for one
set of prior values stored. Latest
memory will be recalled first.
The calculated average will be
applied to a maximum of the
last 3 memories.
14
4. When the measurement is completed,
systolic, diastolic and pulse will be shown
simultaneously on the LCD screen.
The measurement is then automatically
stored into the pre-designated
memory zone.
This monitor will re-inflate automatically
to
approximately 220 mmHg
if the
system detects that your body needs
more pressure to measure your blood
pressure.
NOTE:
1. This monitor automatically switches off approximately
1 minute
after last key operation.
2. To interrupt the measurement, simply press any key.
The cuff will deflate immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or
hand muscles.
