19
1. With the cuff wrapped around your arm, press the START/STOP
button. Do not inflate the cuff unless it is wrapped around your
arm. All digits will light up to check the display functions. The
checking procedure will be completed after about 3 seconds.
2. After all symbols disappear, the display will show “00”. The
monitor is “Ready to Measure” and will automatically inflate
the cuff to start measurement.
3. When the measurement is completed, the
cuff will deflate entirely. Systolic pressure,
diastolic pressure and pulse will be shown
simultaneously on the LCD screen. The
measurement is then automatically stored
into memory.
Note:
• This monitor automatically turns off approximately 1 minute after
last operation. You may also press the START/STOP button to
turn the unit off.
• To interrupt the measurement, you may press the START/
STOP (recommended) or M buttons.
The cuff will deflate immediately after a button is pressed.
• If the cuff does not stop inflating, remove the cuff at once.
START
STOP
START
STOP
M