HoMedics AR-NC02-GB, Инструкция по эксплуатации

Страница: 9 / 168

9
G
B
Fig. 10
Fig. 11
Fig. 12
Fig. 13
TABS TABS
3. Remove the Nano-Coil filter from the unit by grasping the
centre handle and pulling out from the centre hub. See Fig. 10.
4. Use the brush attachment with your vacuum cleaner. Run the
attachment along both sides of the Nano-Coil filter, taking care
not to dislodge the combs. See Fig. 11.
5. Replace the Nano-Coil filter. Make sure to align the centre of the
filter handle with the centre hub. Filter handle should be
vertical. Be sure the post on the centre hub comes through the
hole on the filter’s handle. See Fig. 10.
6. Place the tabs at the bottom of the grill plate into the base of
the unit. See Fig. 12.
7. Hold engaged bottom of the grill plate in place and push the
top of the grill plate back toward the unit until the release tabs
at the top of the grill click back into place. See Fig. 13.
DO NOT USE WATER OR ANY HOUSEHOLD CLEANERS OR
DETERGENTS TO CLEAN THE NANO-COIL FILTER OR PRE-FILTER
Fig. 14
Pre-Filter
Make sure the air purifier is turned off and unplugged from the outlet before cleaning.
Check the filters every 30 days to see if they need cleaning. If you use your air purifier daily, we recommend
checking the filters more frequently.
1. Open the rear grill by gently pushing the release tabs toward
the outside of the unit. See Fig. 14.
IB-ARNC02-0114-01_Layout 1 12/02/2014 12:09 Page 9
All manuals and user guides at all-guides.com