6
7
Operating Instructions
Turning the Unit On
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• Before turning the air cleaner ON, you need to confirm that the filters are firmly in
place and did not become loose during shipping.
1. To check filters, open the rear grill by
gently pushing down on the release
tab on the top of the rear grill. Fig. 1
2. Open the plate outward until the tabs
at the bottom of the grill plate easily
slide away from the unit. Fig. 2
3. The HEPA filters will be resting inside
the unit. Make sure that the filters are
firmly seated inside of the unit. Fig. 3
4. Place the tabs at the bottom of the
grill plate into the base of the unit.
Gently push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched. Fig. 4
Connect the power cord into a
standard AC outlet.
NOTE: Unit will not operate unless filters and grill are properly installed.
Fig. 1
Fig. 2
Fig. 3
NOTE: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. To do so could result in
an electric shock hazard.
Control Panel
Fan Speed
UV-C Bulb
On/Off
Power On/Off
UV-C Bulb Reset
Timer
Oscillation
On/Off
Clean Filter
Reset
Fig. 4
