GB
I
3
Cleansing the Face (Normal & Sensitive Brush Heads)
1. Remove any eye make-up before using this device (It is not
designed for use in the delicate eye area).
2. Attach the appropriate brush head to the device.
3. Wet your skin with warm water.
4. Wet the brush head with warm water and apply a facial cleanser of
your choice to the brush head.
5. Turn the device on, work in circular motions cleanse the skin. Keep
the brush head in contact with to avoid any excess spray from the
device.
Please note:
Ensure the skin is kept damp with cleanser/water and
the unit is constantly moving in circular motions to avoid dragging
the skin.
6. Cleanse the face for approximately 10 seconds per cheek, 20
seconds on the forehead and 20 seconds on the nose and chin area.
7. Rinse your face with warm water and gently pat dry with a towel.
New Users:
It is recommended to cleanse your face with the sensitive
brush before using the normal brush.
Note:
Keep away from eye area.
Moisturising and Massage (Gel Head)
1. Cleanse your face as above.
2. Attach the Gel head to the device.
3. Place a small amount of moisturiser on gel head, switch the device
on and apply the gel head to your skin, working in circular motions
to massage the moisturiser into your skin.
Please note:
Keep away from delicate eye area.
MAINTENANCE
Regular care and cleaning is essential to ensure your
Cleansing Brush is in peak working condition.
To Clean
Clean the unit and heads after each use. Clean the outside of the
product using a damp cloth and dry thoroughly. To Clean the gel or
brush heads, remove them form the unit and wash in warm soapy
water. Allow to dry naturally.
Note:
Do not use abrasive cleaners. Do not use petroleum based or
flammable cleaning agents because of fire risk.
Dependent on use, we recommend that you replace your brush head
every 3-4 months to ensure brush performance is maintained. For
replacement parts, contact your local HoMedics Service Centre. For
details of your nearest HoMedics Service Centre, please go to www.
Homedics.co.uk
To Store
Place the appliance on the charging base in a safe, dry, cool place.
To avoid breakage, do not wrap the charging cable around the
appliance.
