3
Installation (continued)
7
Checking the operation of the
pop-up
□
Operate the lift rod (M) up and down to verify
that the stopper (D) opens and closes correctly.
□
If you want to remove the flange (E), loosen the
lock nut (G) and push the rubber washer (F)
down into the top of the lock nut (G). Remove the
redundant silicone sealant. Top the drain body (H).
Hold the drain body (H) with one hand and loose
the flange (E) from the drain body (H) with the other.
As shown in the below fig 1.
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
6
□
Slide the clip (L) upward, adjust the location of the lift rod strap (K) to the appropriate height and insert
the horizontal rod (J) with the correct hole of the lift rod strap (K).
□
Move the lift rod strap (K) in or out to choose an appropriate location.
□
Press the horizontal rod (J) down to ensure the stopper (D) is in the maximum open position.
Attaching the horizontal rod and strap
□
Slide the clip (L) downward until it secures with the horizontal rod (J).
NOTE: The faucet (A) and lift rod (M) are not included with the product.
D
M
Hole
5
J
D
L
K
1
2
3
3
J
D
L
K
L
K
L
4
4
J
D
3
2
4
1
F
G
F
G
E
H
Fig 1
E