3 HOMEDEPOT.COM
Please contact 1-844-241-5521 for further assistance.
Assembly
1.
This kit contains three venturis (D) and two nozzles (E). Use only one venturi and one nozzle with any
installation. Select the correct nozzle and venturi from the Application Chart as follows.
NOTE:
Be sure to find the right pump model, well depth, and nozzle/venturi combination on the chart or the pump will not perform
according to specifications (See Application Chart as follows).
Use jet package SWJP125 with any of the following pump brands and horsepowers:
3/4HP Everbilt
1HP
Pump HP
Use:
Nozzle
Venturi
3/4 #51
N32P-72
1 #51
N32P-63
1/3HP – Flotec 4300 Series
1/2HP – Simer 3300 Series
3/4HP – Craftsman 2500
1 HP– Deep well Series
Pump HP
Use:
Nozzle
Venturi
1/3 #51
N32P-72
1/2 #51
N32P-72
3/4 #51
N32P-63
1 #54
N32P-64
2.Inspect the ejector body, nozzle, and venturi carefully to BE SURE that they are clean and free of all foreign
materials.
Dirt, sand, or gravel will plug the ejector!
3. Use a 5/8 in. deep-well socket to install the new nozzle (E) in the ejector body (H). The nozzle screws into the
second set of threads visible inside the ejector discharge port (the larger port) in the ejector body.
4.Place the O-ring (C) in the groove in the venturi (D) and install the venturi (D) in the ejector body (H).The venturi
threads into the first set of threads in the ejector discharge port (it threads in over the nozzle).The end of the venturi
will extend out of the port when it is installed.
