1. Do not dispose of batteries in fire; batteries may explode or leak.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
III. REMOTE CONTROLLER OPERATION
1. Point the remote controller at the receiver and press the desired button.
2. The remote controller will work at distances of up to roughly 16' (5 m) and at
3. Avoid direct sunlight as the effect of the lens can be altered
4. The batteries must be removed from the remote controller are exhausted
disposed of.
an angle of 30° between right and left from the control panel.
and safely
BATTERY WARNING
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, do not plug into the socket.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor housing free from dust and fluff. Unplug before cleaning vents with a
vaccum cleaner. Do not disassemble the fan to remove fluff.
3. Do not allow water or any other liquid into the motor housing or interior parts.
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moistened with mild soap.
Thoroughly remove soap film with dry cloth.
3. Do not use any abrasive detergent or solvent to voice scratching the surface.
Do not use gasoline or paint thinner to clean.
MAINTENANCE INSTRUCTIONS
CLEANING
5
