background image

6-6

- Space (            ) : Write between two characters.

- Back (              ) : Delete characters.

- Caps (             ) : Change between caps and lower case letter.

- Done (             ) : To save the change.

- Cancel (           ) : Exit rename mode.

a) Select 

Lock

 Icon using the Opt button.

b) Select the channel to be locked and press the            button.
    And then the following message window will appear.
c) Set the password. Locking mark will appear on the left side of
    the Channel name. To cancel it, just press the          button
    again.
d) Press the          button to save and exit. 

6.3.5 Lock Mode

6.3.6 Group Mode

th

You can make the group up to the 8  group. It can accommodate 100 Channels in one group. So you 
can get 800 favorite channels.

a) Select Group Icon using the 

Opt 

button.

b) Select the channels that you want to make favorite channel
    list.
c) Press the            button, and then a small favorite Window will
    appear on the right side of the screen.
d) Choose the group number using the  /  button and press

 the  

button. To cancel it, just press the  

button

    again.
e) If you want to select other channel in current group, press the

 

/

 button. And then highlighted channel will be showed on

    the channel list. 
f) Press the           button to set the group with selected group
    using the  /

 button. 

g) Press the        button to save and exit.

Viewing General Information

Содержание HT5000













































Отзывы: