Homebrace MyEcc Pupil, Руководство по эксплуатации, Страница: 14 / 17

14
HomeBrace Germany UG (haftungsbeschränkt)
Konrad-Hornschuch-Str. 67 | Halle 24, C1 | 73660 Urbach
+49 7181 255700 | info@homebrace.com
www.homebrace.com
BUTTON5_Y_PERCENT=31
BUTTON6_X_PERCENT=35
BUTTON6_Y_PERCENT=39
BUTTON7_X_PERCENT=30
BUTTON8_X_PERCENT=36
BUTTON8_Y_PERCENT=31
ACTIVEDELAYTIME=400
Describes the time the software takes to activate a command from the
center button
ACTIVEDELAYTIMEGAP=400 Time the software takes to activate a drive command from another
button
OVERCALIBRATIONPERCENT=10
In this case, 10% is deducted from the maximum calibration
[MAPPING] The buttons can swap functions
FUNCTION1=1 Drive forward
FUNCTION2=2 Drive right
FUNCTION3=3 Drive in reverse
FUNCTION4=4 Drive left
FUNCTION5=5
FUNCTION6=6
FUNCTION7=7
FUNCTION8=8
Tip: If using MyEcc Pupil from a reclining position, operation is easier if functions 1 and 3 swap places, i.e.
looking down will drive the chair forward and looking up will drive it back.
16 Important for users
16-01 Operation
Please note all the information in this operating manual before starting operations (especially items 01 to 17)! The applica-
tion will run only if the control box is connected� Messages will appear if the control box is not recognized at the USB port�
You can make the application window larger or smaller but these changes will not be saved in eccapp�ini�
!
You must check the MyEcc safety features�