Homebrace MyEcc Pupil, Руководство по эксплуатации

Страница: 7 / 17

7
HomeBrace Germany UG (haftungsbeschränkt)
Konrad-Hornschuch-Str. 67 | Halle 24, C1 | 73660 Urbach
+49 7181 255700 | info@homebrace.com
www.homebrace.com
12 Contents of the pack
• MyEcc Pupil Control control box
• MyEcc Pupil software supplied as an executable app, no installation required, contained on a USB memory stick only
• Connecting cable; 3 × jack cables, 9-pin D-sub cable, USB cable
• HomeBrace bag
• Headset frame and cord
13 Wheelchair procedure
The power chair needs to be prepared for switch control by the installer (authorized specialists only!)� This step is not
included with MyEcc Pupil; please contact your contractual partner (system installer or manufacturer) for this purpose�
Interfaces may be:
• Omni Display
• IOM module
• Switch interface
For the optimal use of the wheelchair with our MyEcc product group we recommend a corresponding driving stability
module of the wheelchair manufacturer�
14 Installation on the wheelchair
14-01 Technical requirements
A MyEcc Pupil Display with at least a Core i5 Processor and 4 GB of RAM is required for calibration and installation� You
will need Windows 10 with all the latest updates (as of 9/1/2019)�
The display for wheelchair control does not strictly need to be positioned in the field of vision in combination with the
MyEcc Pupil� It can for instance be attached in the eye control scan area for communication and be removed from the
vision area for wheelchair control�
11 Power requirements
USB to 5VDC connector (100mA)
14-02 Assembling MyEcc Pupil Control
When wiring and assembling, please check the wheelchair routes� Poorly run cables may be torn off� The MyEcc Control
control box should be attached to the wheelchair in a (waterproof) bag if possible, preferably at the back of the wheelchair or
the armrest�