HOMEBIOGAS Bio-Toilet, Руководство пользователя

Страница: 21 / 24

21
troubleshooting
Bowl fills when toilet not in use
•
Fit vented loops
Wastewater re-appears in bowl
•
Check bottom valve (16) and joker valve (33)
Bowl does not empty & difficult to push handle
down
•
Fully shut flush control lever
•
Check joker valve (33) or discharge hose for blockage
Bowl does not empty and difficult to pull handle up
•
Remove pump and check for blockage
Bowl does not empty although handle is easy to
push and pull
•
Check piston o-ring (30), bottom valve gasket (16) & joker
valve (33)
Water does not come in and handle springs up if
pushed down
•
Fully open flush control lever (23)
Water does not come in although handle is easy to
push and pull
•
Open flush control lever (23)
•
Check top valve gasket (21) and o-ring (30)
•
Check inlet hose connections are airtight
Flush water is slow to appear during pumping
•
Shorten inlet hose from water source
•
Do not fit a vented loop between water source and pump
•
Fit between pump and bowl
•
Fit non-return valve in inlet
Leakage around the piston
•
Replace seal assembly (18)
Wastewater re-appears in bowl
•
Make sure handle is in locked position. Check bottom valve
(16) and joker valve (33)
Pumping is difficult
•
Lightly lubricate the piston metal rod of the bio toilet pump
with the
•
silicone grease (included in the box). Full effect after 2 days.