ASSEMBLY INSTRUCTIONS
Step 1
Insert the front legs (2) and rear legs (3) into the tubes of the curved leg base (1) then loosely attach the roof tube (4) to the front and
rear leg tubes with M6 locknut (19) and the small flat washer (21) on one side, and bolt (28) and small flat washer (21) and a bolt cap
(23) on the other side using the Spanner (29).
Step 2
Loosely attach the middle crossing tube (12) to the curved leg base with bolts (28), small flat washers (21) and bolt caps (23).
Loosely attach the rear crossing tube (11) to the rear legs with bolts (27), small flat washers (21), bolt caps (23), M6 locknuts (19),
small flat washers (21) and nut caps (25) using the spanner (29).
Step 3
Loosely attach both armrest tubes (8) to seating and backrest panel (5) with M8 locknut (18), big flat washers (20), M8
nut caps (24), bolts (16), big flat washers (20) and bolt caps (22) using the spanner (29).
Loosely attach the upper front hanging tube (9) to the armrest with M8 locknut (18), big flat washers (20), M8 nut caps
(24), bolts (17), big flat washers (20) and bolt caps (22) using the spanner (29).
Loosely attach the upper rear hanging tube (10) to the armrest with bolts (15), big flat washers (20) and bolt caps (22).
Place the springs (13) through the hole connecting the front and rear hanging tube using the spanner (29).
21
19
1
2
4
21
23
28
3
11
12
25
19
21
21
27
23
21
28
23
9
8
13
10
5
24
18
20
22
17
20
24
18
20
16
22
20
20
22
15
