5
Digital Satellite Receiver SMP-6200
3. CONNECTIONS
Please refer to Figure 1 and Figure 2 for the following instructions. Connect the LNB cable from the dish antenna to the
LNB IN connector on the back of the digital satellite receiver. Use the RCA audio/video cables to connect the Audio
Left, Audio Right, and Video Output to the corresponding connectors on TV.
Figure 1
Front Panel
POWER/ESC
To switch between standby and power-on states.
ef
To adjust the volume output of the receiver when receiving TV programs, or change parameters
within the menu.
cd
When receiving TV programs, pressing these keys switches to the next higher or lower numbered
program, or to move the scroll bar up or down on the menu.
MENU
To bring up the main menu, or exit from menu or submenu.
SELECT
To enter the next lower level submenu or to confirm the parameter value entered.
