16
Digital Satellite Receiver SMP-6200
5.1.3.1.2
Auto Searching
To enter this menu, user can press OK key from the installation screen. There are two bars on the bottom to indicate the
signal strength and quality. The bars in green color show the signal is in good condition. This menu will automatically
search for the existing channels by the frequencies.
Auto Search
Installation
Main Menu
●
Satellite
AMC-4
●
Frequency
12120
●
Scan mode
All
●
Start Scan
Move OK
OK
●
Antenna Setup
Select Exit
EXIT
Satellite
It shows the satellite name. User can select the satellite name by pressing
e
/
f
keys. The total
number is 32. Press OK key to show all satellite lists.
Frequency
It shows the frequency of the transponder user selected. The corresponding symbol rate and
polarization that have been confirmed. Press OK to display the list of existing frequencies.
Scan Mode
It shows two scan modes in this entry by pressing
e
/
f
key. Set scan mode to all, all the channels in
the transponder you selected will be download if the signal is locked. Set scan mode to FTA, only
free-to-air channels can be downloaded.
Help Menu
Press
c
/
d
keys to select between the following items, press
e
/
f
or input 0~9 to change its value:
press OK to show all available options.
Press Red key on remote to get into search menu.
Press Blue key on remote to return to antenna setting menu.
