23
Cleaning and Maintenance
REPLACE THE LED LIGHT FIXTURE:
•
This range hood uses LED light fixture (MAX 2W, 12V).
•
Place a flat-head screwdriver between the light housing and the range hood.
• Gently pry up the light housing and search for the metal clip. (Recommend to use multiple layers of
tape over the screwdriver head to prevent any scratching of the finish.)
•
Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and discard
the old light fixture.
•
Reverse the steps to install a new LED light fixture. Turn on the breaker and the range hood to test
for operation.
CAUTION:
Do not touch the lights until the appliance is switched off and cooled.
NOTE:
• Light settings are independent from other settings (including power-off delay).
• Lights have to be manually turned on or off.