19
Operating Instructions
1.
POWER:
Turn the air conditioner on or off.
2.
Cool:
Press the COOL button to enter COOL mode.
3.
and :
Use these buttons on the control panel and remote to increase or decrease the Set
Temperature or Timer. Temperature range: 61°F-88°F or 16°C-31°C.
4.
Sleep:
Press the SLEEP button, all of the display lights will turn off after a while with only the Sleep
light on. In SLEEP mode, the air conditioner will automatically adjust the temperature and fan speed
to make the room comfortable while you sleep. The set temperature will automatically rise every
30-60 minutes and at most change six times until the set temperature reaches 81°F or 82°F.
5.
TIMER:
Timer Off:
When the unit is on, press TIMER button to set timer off. Set the timer by pressing the
button “
” or “
” until your desired time is reached. Press TIMER button again to confirm.
Timer On:
When the unit is off, press TIMER button once and set the temperature by pressing “
”
or “
”
. Press TIMER button a second time, set the timer by pressing the button “
” or “
”
.
Press TIMER button a third time to confirm the setting.
NOTE:
It can be set to automatically turn off or on in 0.5-24 hours. Each press of the “
” “
”
buttons will increase or decrease the timer in 0.5 hour increment below 10 hours and 1 hour
increment for 10 hours or above. The SET light will turn on while setting. To cancel the set function,
press the TIMER button again.
6.
Auto Mode:
In AUTO mode the unit automatically chooses the mode of operation (COOL, DRY or
FAN). In this mode the temperature will be set automatically according to the room temperature
(tested by the temperature sensor which is incorporated in the indoor unit.).
7.
Fan Speed:
Press the FAN SPEED button for various fan speed options. You can choose Hi, Med, Lo
or auto speed in COOL mode and choose Hi, Med, Lo in FAN mode.
8.
Display:
Press the DISPLAY button to switch off/on all lights or LED display.
9.
ECO:
When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn off once
the room is cooled to the set temperature. The unit will turn back on when the room temperature
rises above the set temperature. Before the compressor starts, the fan motor will turn on and off
repeatedly to provide comfortable feeling and save energy.
10.
Fan Only:
Press the FAN ONLY button if you need Fan Only mode.