Home HME030340N, Руководство пользователя, Страница: 6 / 15

10 11
LCDI POWER CORD AND PLUG
This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord that
is required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current.
If the cord is damaged and leakage occurs, power will be disconnected from the unit.
The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test
the plug:
1. Plug power cord into a grounded 3 prong outlet.
2. Press RESET (on some units a green light will turn on).
3. Press the TEST Button, The circuit should trip and cut all power to the air conditioner (on some
units a green light may turn off).
4. Press the RESET button for use. You will hear a click and the unit is ready for use.
NOTES:
• The RESET button must be engaged for proper use.
• The power supply cord must be replaced if it fails to trip when the
TEST button is pressed and the unit fails to reset.
• Do not use the power supply cord as an ON/OFF switch. The power
supply cord is designed as a protection device.
• A damaged power supply cord must be replaced with a new power
supply cord.
• The power supply cord contains new user serviceable parts. Opening
the tamper-resistant case voids all warranty and performance claims.
NOTES:
The power cord and plug may differ from the one shown above.
Electrical Requirements
A. Reset button
B. Test button
The electrical ratings for your air conditioner are listed on the model and serial number label located on
the front left side of the unit (when facing the front).
Specific electrical requirements are listed in the chart below. Follow the requirements below for the type
of plug on the power supply cord.
Wiring Requirements Power Supply Cord
• 115vol (103min - 127max)
•
(8K) 0-8 amps
(10K-12K) 0-12 amps
• (8K) 10-amp time-delay fuse or circuit breaker
(10K-12K) 15-amp time-delay fuse or circuit breaker
• Use on single outlet circuit only
Recommended Ground Method
For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a
3 prong power supply cord with a grounded plug. To minimize the possibility of electrical shock, the cord
must be plugged into a 3 prong outlet and grounded in accordance with all local codes and ordinances.
If a 3 prong outlet is not available, it is the customer’s responsibility to have a properly grounded 3 prong
outlet installed by a qualified electrician.
It is the customer’s responsibility:
• To contact a qualified electrician
• To assure that the electrical installation is adequate and in conformance with the National
Electrical Code, ANSI/NFPA 70 - latest edition, and all local codes and ordinances.
Copies of the standards listed may be obtained from:
• National Fire Protection Association
• One Batterymarch Park
• Quincy, Massachusetts 02269
Electrical Requirements