Home HME030340N, Руководство пользователя, Страница: 11 / 15

20 21
Operating Instructions
4. Mode Button: Press the mode button to cycle through the various modes: Cool, Dry, Fan and Auto.
Cool Mode: The cooling function allows the air conditioner to cool the room and at the same
time reduces air humidity. Press the MODE button to activate the cooling function. To optimize
the function of the air conditioner, adjust the temperature and the speed by pressing the button
indicated.
Dry Mode: This function reduces the humidity of the air to make the room more comfortable. Press
the MODE button to set the DRY mode. An automatic function of alternating cooling cycles and air
fan is activated. Dry mode only can be controlled on control panel.
Fan Mode: The conditioner works in only ventilation. Press MODE button to set the FAN mode. With
pressing SPEED button the speed changes in the following sequence: Hi, Med and Lo in FAN mode.
The remote control also stories the speed that was set in the previous mode of operation.
Auto Mode: In AUTO mode the unit automatically chooses the mode of operation (COOL, DRY or
FAN). In this mode the temperature will be set according to the room temperature (measured by the
temperature sensor which is incorporated in the indoor unit.).
5. Timer Button: Use these buttons on the control panel and remote to set the Timer.
Timer Off: The timed stop is programmed by pressing TIMER button. Set the timer by pressing the
button “ ” or “ ” until your desired time is reached. Then press TIMER button again to confirm.
Timer On: When the unit is off, press TIMER button once. Set the temperature by pressing the
button “ ” or “ ”. Press TIMER button a second time, set the time by pressing the button
“ ” or “ ”. Press TIMER button a third time to confirm the setting.
Note: It can be set to automatically turn off or on in 0.5-24 hours. Each press of the “ ” “ ”
buttons will increase or decrease the timer in 0.5 hour increment below 10 hours and 1 hour
increment for 10 hours or above. The SET light will turn on while setting.
To cancel the Timer function, press the TIMER button again.
6. Eco Button: When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn off
once the room is cooled to the set temperature. The fan will also be off at this point. The unit will
turn back on when the room temperature rises above the set temperature. Before the compressor
starts, the fan motor will turn on and off repeatedly to provide comfortable feeling and save energy.
7. Sleep Button: Press the SLEEP button, all of the display lights will turn off after a while, leaving only
the Sleep light on. In SLEEP mode, the air conditioner will automatically adjust the temperature and
fan speed to make the room more comfortable during night. The set temperature will automatically
raise every 30-60 minutes, and at most change six times until the set temperature is 81 °F or 82 °F.
Set fan speed to low before turning on the SLEEP mode.
8. Speed Button: Press the SPEED button for various fan speed options. You can choose Hi, Med, Lo or
Auto speed in COOL mode and choose Hi, Med, Lo in FAN mode.
9. Filter Button: When the Filter Check light is off, it is not necessary to press the Filter Check button.
When the Filter Check light is on, turn off the light by pressing the Filter Check button. After the
working time of fan motor reaches 500 total hours, the Filter Check light will turn on to remind the
user to clean the filter.
10. Directional Louvers: To direct the airflow, use the horizontal wheel to control the horizontal
direction, and the air deflectors to control the vertical direction.
Operating Instructions
REMOTE CONTROL
Battery Size: AAA
NOTE:
Do not mix old and new
batteries or different types of
AAA batteries.
USING YOUR AIR CONDITIONER (CONT.)