background image

SPECIFICATIONS

ADVANTAGES OF LED’S

CARE AND CLEANING

For further questions or assistance, please contact American Customer Service at 

1-855-232-6427; serving in English, Spanish and French, Monday through Friday, 8am to 

8pm Eastern Time. Outside of business hours you can reach us by e-mail at 

[email protected] and we will reply to you on the next business day. 

Please enter the Costco item number # 1193826 in the subject line.

1. Detection Method:  Passive Infrared Sensor (PIR).  PIR measures infrared light radiating  

    from objects in its field of view. Apparent motion is detected when infrared levels change.

2. Sensor Range: Up to 21.3 m / 70 ft  x 240 degree spread (Varies with surrounding temperature).

3. Time Adjustment:  1, 3, 7 minutes.

4. Power Source:  120VAC/60Hz, 37W.

5. Load Rating: No extra lights should be added to this unit.

1. Energy saving – much lower power consumption and $$$ savings.

2. Longer lifetime – Solid State lighting has no filament to break.

3. Light does not radiate heat.

-  To prolong the original appearance, clean with clear water and a soft, damp cloth only.

-  Do not use paints, solvents, or other chemicals on this light fixture. They could cause a    

   premature deterioration of the finish. This is not a defect in the finish and will not be covered  

   by the warranty. 

-  Do not spray with a hose or power washer.

For replacement parts, call our customer service department at 1-855-232-6427; serving in 

English, Spanish and French, Monday through Friday, 8am to 8pm Eastern Time. Outside of 

business hours you can reach us by e-mail at 

[email protected]

 and we 

will reply to you on the next business day. Please enter the Costco item number # 1193826 in 

the subject line.

TROUBLESHOOTING

B   

Small mounting bolt 

1

C   

Decorative Cover 

1

D   

Mounting plate 

1

E   

Mounting Bracket 

1

F   

#6-32 X 3/4” Junction Box Screw 

2

G   

#8-32 X 3/4” Junction Box Screw 

2

Part 

                           Description                                 Quantity

REPLACEMENT PARTS LIST

B

C

D

E

F

G

10

11

Содержание AEC-5340







Отзывы: