Grounding Instructions
This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
the electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment
-
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
D
ANGER
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it
will not fit the outlet, you may temporarily use an
adapter (such as the one shown in Figure B) until you
have a proper outlet (such as the one shown in Figure
C) installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in
Figure A
.
A temporary adapter that looks like the adapter illustrated in
Figure B
may be used to connect this plug to a 2-pole
receptacle as shown in
Figure D
if a properly grounded outlet
is not available. The temporary adapter should be used only
until a properly grounded outlet
Figure C
can be installed by
a qualified electrician. The tab for grounding screw
Figure B
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover
. Whenever the adapter is used, it must be held in place
by a metal screw
.
See Figures D and E.
P
erfect Steam F
eatures
•
S
afe for use on all types of fabrics
•
Quick heat
-up feature emits steam in 45 seconds
•
Convenient integrated garment hanger
•
Telescoping design for compact storage
•
5’ flexible hose with Safe T
ouch™ hose cover for safe and
comfortable handling
•
Easy
-fill water tank provides 40 minutes of continuous steam
•
Rolling casters for excellent mobility
•
Low water auto shut
-off for safe use
•
Convenient drain at base
Assembly Instructions
1.
Carefully remove all contents from packaging and inspect the
product to make sure all components have been received (Fig. 9).
2.
Insert pole into top of unit. Match the grooves on the pole with the
notches in the pole connector and push down. Securely screw the
cap on the pole over the connector by turning it clockwise (Fig. 1).
3.
To
attach the hanger attachment, align tabs in plastic hanger with
grooves on pole and push down (Fig. 2).
4.
F
ully extend the telescopic pole. T
o
do so open the 3 clips on the
pole and pull the pole upwards (Fig. 2). When fully extended
close the clips. Make sure that the pole is securely locked into
place and cannot be pushed downward.
5.
Attach the garment steamer brush to the nozzle by setting into
place (Fig. 3).
6
.
Attach handle & hose assembly to unit. Line up the arrow on the
hose with the white dot on the hose connector
. Insert and turn
arrow on hose clockwise until it is lined up with the black dot
(Fig. 4). It should now be locked into place. Y
o
u
may hang the
steamer handle on the hanger attachment (Fig. 3).
NOTE: Do not hang the hose on the hanger attachment until after it
has been connected to the base to prevent the hose from falling
on you.
4
5
Figure A
Grounding Pin
Adapter
T
ab for
Grounding
Screw
Figure B
Grounded
Outlet
Figure D
Figure C
Figure E
Metal Screw
Figure 1
Figure 2
Figure 3
Figure 4
P
ole
Turn
Brush
Clips
Plastic Hanger
Insert
Turn
PS-200C 1/27/05 10:32 AM Page 5
