Assembly Instructions 2/4
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
STEP 2
Attach the Side Frame L (B) to the Base
Panel (F) with Head Cap Bolts.
Attach the Front Rail (E),Lower Back Stretcher (G)
to the Assembled Unit. Tighten the Head Cap Bolts.
Attach the Middle Back Stretcher (H) to the Lower
Back Stretcher (G), then slide the Back Panels (I) in place.
Attach the Upper Back Stretcher (D) to the Assembled Unit.
Tighten the Head Cap Bolts.
STEP 3
E
I
I
H
G
D
F
F
B
Attach 4 Casters to the under side of
the Base Panel (F) with Wood Screws (
I
),
put the 2 Casters with brakes in front as
you first need to lock the cart from moving.
C
K
J
J
Attach the Side Frame R (C) to the Assembled Unit, then tighten Head Cap Bolts.
Attach the Handle Arms (J) using Head Cap Bolts from the inside of the both Side Frames and
put the Round Arms (K) in place.
Tighten Head
Cap Bolt by
Hex Wrench.
