9
Troubleshooting
This chapter summarizes the most common problems you could encounter. If you are unable to
solve the problem with the information below, contact your local Silk’n Customer Service Center
for further support.
Solution
Possible Cause
Problem
Charge the
APPLICATOR
The rechargeable
batteries are empty
Silk’n Reju does not
work
Contact your local Silk’n customer Service
center
The
APPLICATOR
is
broken
Charge the
APPLICATOR
The rechargeable
batteries are empty
Silk’n Reju suddenly
switches off
No action is required
This is normal
Device temperature
rises during recharge
Insert the
PLUG
into the
BASE UNIT SOCKET
The
ADAPTOR
is
not plugged in the
electrical outlet
BATTERY – CHARGING -
INDICATOR LIGHT
(K)
does not turn on
when connecting the
PLUG
into the
BASE
UNIT SOCKET
Connect another appliance to the wall
socket to check if the electrical outlet is live
If the
APPLICATOR
still does not charge,
contact your local Silk’n Customer Service
Center
Make sure the
APPLICATOR
is inserted
properly into the electrical outlet and/
or
PLUG
is inserted properly into the
BASE
UNIT SOCKET
The
ADAPTOR
is not
inserted properly
into the electrical
outlet and/or the
PLUG
is not inserted
properly into the
BASE UNIT SOCKET
Contact your local Silk’n Customer Service
Center
The
APPLICATOR
is
broken
No action is required
This is normal
APPLICATOR
temperature rises
during use
Press the
ON/OFF SWITCH
twice to switch
the Applicator off and on again. If
READY/
TREATMENT MODE - INDICATOR LIGHT (I)
does
not illuminate again, contact your local Silk’n
Customer Service Center
The
APPLICATOR
needs to be reset
READY/TREATMENT
MODE - INDICATOR
LIGHT (I)
does not
illuminate when
pressing the
ON/OFF
SWITCH
Содержание Silk'n Reju
Страница 1: ...1 Instructions for Use ...
