Home Skinovations Ltd. Silk'n Reju, Инструкция по эксплуатации

Страница: 8 / 16

6
When
BATTERY – CHARGING - INDICATOR LIGHT (K)
turns off and
BATTERY – FULL - INDICATOR LIGHT (L)
illuminates, your Silk’n Reju is fully charged and ready to start.
(Recharging will be needed when
BATTERY – CHARGING - INDICATOR LIGHT (K
) illuminates again.)
Plan your Silk’n Reju treatment for best results
The efficiency of the results varies from person to person and according to the frequency of
use. Some may see results sooner than others.
A single Reju session usually takes 15-20 minutes in which you should gently glide the Reju
applicator slowly over the desired treatment area. During the procedure you should feel gentle
heat penetrating deep into the skin.
Initial Silk’n Reju treatment course: For the first month (4 weeks), treatment should be
performed 3 times a week for 15-20 minutes each time.
Silk’n Reju maintenance regime:
Use Silk’n Reju once a week for 15-20 minutes.
Treating with Silk’n Reju for the First Time
The skin should be, clean, dry and free of any powder, gel or cream.
Remove Silk’n Reju
APPLICATOR
from its cradle in the
BASE UNIT
.
Press the
POWER ON/OFF SWITCH
. The green
READY/TREATMENT MODE 1 - INDICATOR LIGHT (I)
will
start blinking, and shortly afterwards will be lit steadily.
Your Reju is ready for treatment.
Place the
TREATMENT SURFACE
on your skin. The
LED
light will automatically activate.
Apply light pressure while slowly moving the Reju
APPLICATOR
in small circular motions. The
TREATMENT SURFACE
temperature will slowly increase.
Perform the treatment for
5-7 minutes on each area.
It is recommended to
apply a small amount of a
moisturizing cream on the
treated skin areas after each
session and to massage it
gently in circular motions.