1. Press , button to move forward,back, press ,
to move left,right when the robot is in pause status.
2. Choose different cleaning mode: spot/auto/docking.
3. Pause button: press this button to pause the operation of
the robot
4. Directional buttons: forward, backward, leftward,
rightward.
5. Press the on/off button to turn the robot off when it is on,
the robot will be in standby status. When the robot in
standby status, you can use the remote control to turn on
the robot. If you need use the remote control to turn on
the robot, do not turn off the robot manually.
6. Press Docking to control the robot in auto charging,when
the robot is with enough power, you can also cut off the
charging base and put the mop on to make the robot
working on mop cleaning mode.
Attention:
• With the remote controller will be much more effective in the range of 6M.
If the robot is near docking, virtual wall or other infrared emission sources,
the signal may be interfered. Please control the robot manually.
• If the floor condition is too complex such as there is too much obstacles,
the robot may fail to find the charging base.
• If the robot is in front of docking, virtual wall or other infrared emission
sources no more than 3M, the signal may be interfered. Please control the
robot manually.
• You should use the remote control within 6 m (radio signal scope), depending
on status of the battery of robot, or you may fail to control the main body.
No.
Function Guide
Function Information
1
Power LED
The Power LED will light when the Docking
Station is connected with the power, or turn
off if not connected. If the robot is in
charging status, the green indicator of
power on robot will flicker.
2
Signal transmitting
Transmitting signal is the only way to lead
the cleaner to return the Docking Station for
charging, so the signal transmitting position
should be clean for long without any obstacle
on it.
3, 4 Recharging positive &
negative electrode
The electrode and that of the Cleaner are
connected to charge under contact mode,
so the position should be clean without any
obstacle on it while using, or there will be
impact to the charging.
5
Charging power
DC socket
The power DC socket, called recharger
for short, used to connect output terminal
DC20V of the adaptor, is the charging tran-
sit station between the Cleaner and adaptor,
so the recharger should be placed against
the wall firmly and the adaptor cable should
be away from the recharger, or the Robot
may have impact and winding during
cleaning.
Attention:
Some essence may damage the plastic surface, so please make
purchase and use after consideration.
7. Docking charging
8. Preset cleaning time
Overall Display
Function Instruction
1. Power LED
2. Signal transmitting
3. Charging positive electrode
4. Charging negative electrode
5. Charging power DC socket
1. Turn the robot off, press 3 key on the robot together, then green, red light
will flicker one time, blue light on, which mean preset cleaning time success-
fully. After 1 second, the robot will start work( if you need to stop the robot
work and do not need to cancel the preset cleaning time, press”start/pause”
key or use the remote control to pause the robot). When the robot is in short
power,the robot will enter into auto charging mode automatically and will start
work on the preset time next days.
2. Before preset the cleaning time, please make sure when you need the robot
to work. For example, if you need to preset the robot work on 10:30 AM,
you need to operate the preset function on 10:30 AM, then the robot will
start working at about 10:30 AM the next days.
3. If you need to cancel the preset time, only to turn off the robot manually, then
this function will be cancelled.
The Docking Station Display and Control Panel:
Using Method & Functional Status of the Docking station :
(26
(27
