14
ENGLISH
• By using Scraper
1. Make sure if the device is turned off and that the switch is (O / I) to OFF position.
2. Use the cleaning pin to remove scale deposits
from the small hole of the stream outlet in the
Main Body by swirling and pushing the pin up
and down you will clean the steam outlet. Always
ensure that all scale debris has been removed
from the steam outlet before reassembling.
Continue swirling Cleaning Pin until no further
debris is evident.
• By using cleaning solution
1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2. Secure and position the unit to ensure steam released is slimed away from the floor or
surrounding objects and surfaces. Plug the unit in, turn the unit ON by pressing the Power
Switch (O/I) and allow the unit to produce steam until the vinegar/water solution is used up.
3. Repeat the above procedures as many times as necessary until a normal steam flow rate is
achieved.
4. Fill the water tank with fresh water and rinse out.
5. Fill the water tank with fresh water, attach to the unit and release steam through the system
until the water tank is empty.
To remove lime scale from the mop, please follow these procedures:
CAUTION:
Do not leave the steamer unattended during the lime scale
removal process and /or while in use. Perform a test cleaning on a suitable
isolated area after each lime scale removal to ensure that there is no debris in the
system.
Cleaning blocked steamer accessories:
Due to the high mineral content of water in some areas, you may notice that less steam comes
out from the Hand-Held Steamer accessories. This may be caused by calcium build-up inside
the tip of the nozzle. To clean calcium build-up, we recommend using a spray lubricant. Spray a
small burst or two of the lubricant inside the tip of the jet nozzle. After spraying lubricant inside
the component, fill the steamer with water according to the directions and run a continuous jet
of steam through the affected accessory to several minutes to remove the deposit. Once the
steam pathway is clean, aim the steamer at a neutral surface or a cleaning cloth to make sure
no debris is emitted.
CAUTION:
WE RECOMMEND PREFORMING THIS PROCEDURE IN A
PROTECTED AND WELL-VENTILATED AREA.
Содержание SM-13002R
