background image

Owner’s Manual

9

General Precautions (cont’d)

Servicing

z

Maintain labels and name plates on the generator and engine. These 
carry important information. If unreadable or missing, contact 

All Power

America 

immediately for a replacement.

z

Generator service must be performed only qualified repair personnel. 
Service or maintenance performed by unqualified personnel could result 
in a risk of injury.

z

When servicing a generator, use only identical replacement parts. 
Follow all appropriate instructions in this manual. Use of unauthorized 
parts or failure to follow maintenance instructions may create a risk of 
electric shock or injury.

Heart Pacemakers

Installation

z

Ensure installation meets all applicable safety, and local and national 
electrical codes. Have installation performed by a qualified, licensed 
electrician and building contractor.

z

All electrical work, including the earth-ground connection, should be 
completed by a licensed electrician.

z

Any separate fuel storage or generator supply facility must be built or 
installed in full compliance with all relevant local, state, and federal 
regulations.

z

It is recommended to use the generator only in well ventilated outdoor 
areas. A running gasoline engine will generate carbon monoxide, a 
colorless, odorless gas that, if inhaled, can cause serious injury or 
death. If the generator is installed indoors, exhaust fumes must be piped 
out of the building using leak-free, heat resistant piping. Pipes and 
silencer should not use any flammable materials, nor should they be 
installed near the same. Generator exhaust fumes must be within legal 
limits and installation must always meet local building codes.

WARNING!  PEOPLE WITH PACEMAKERS SHOULD CONSULT THEIR 
PHYSICIAN(S) BEFORE USING THIS PRODUCT. ELECTROMAGNETIC 
FIELDS IN CLOSE PROXIMITY TO A HEART PACEMAKER COULD 
CAUSE INTERFERENCE TO OR FAILURE OF THE PACEMAKER.

Содержание HDP-3500





























Отзывы: