background image

3

HOMEDEPOT.COM/HOMEDECORATORS 

Please contact 1-800-986-3460 for further assistance.

Please read and understand this entire manual before 

attempting to assemble, operate or install the product. If you 

have any question regarding the product, please call customer 

service at service at 1-800-986-3460, 8 a.m.-7 p.m., EST, 

Monday-Friday,  9 a.m. - 6 p.m., EST, Saturday. 

 

When using electrical appliances, basic precautions should 

always be followed to reduce the risk of fire, electrical shock, 

and injury to persons including the following:
 
1.      Read all instructions before using this appliance. 
2.      If possible, always unplug this appliance when not in use.
3.      Only a qualified service person should repair this product.
4.      Do not use outdoors.
5.      Do not cover the cord under the carpeting. Do not cover 

      with throw rugs, runners or the like. Arrange the cord away 

         from traffic areas and where it will not be tripped over.
6.      To disconnect this appliance, turn the controls to the off   

      position, and then remove the plug from the outlet.
7.      Connect to properly grounded outlets only.
8.      This appliance, when installed, must be electrically 

       grounded in accordance with local codes or, in the 

      absence of local codes, with the current CSA C22.1 

         Canadian Electrical Code. For U.S.A. installations, follow 

         local codes and the National Electrical Code, ANSI/NFPA 

         NO.70. 
9.    This appliance has hot and arcing or sparking parts inside 

         Do not use it in areas where gasoline, paint or flammable 

         liquids are used or stored. This fireplace should not be 

         used as a drying rack for clothing. Do not hang Christmas 

         stockings or other decorations on or near this product.
10.   There is a thermostat limiter inside the heater. When inner  

    temperature overheating or abnormal heating occurs, the  

     thermostat protective device will cut off the power supply 

         to avoid damage to the fireplace or risk of fire.

Safety Information

DANGER:

 

High temperatures may be generated under 

certain abnormal conditions. Do not partially or fully cover 
or obstruct the front of this heater.

WARNING:

 

If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly qualified 
persons in order to avoid a hazard.

WARNING:

 

Under no circumstances should this fireplace be 

modified. Parts that must be removed for servicing must be re-
placed prior to operating this fireplace again.

WARNING:

 

In order to avoid overheating, do not cover the 

heater.

WARNING:

 

Use extreme caution when operating heater 

near children and the disabled.

WARNING:

 

Do not insert or allow foreign objects to enter 

any ventilation or exhaust opening as this may cause an electric 
shock or fire, or damage the appliance.

WARNING:

 

To prevent a possible fire, do not block air intakes 

or exhaust in any manner. Do not use on soft surfaces, like a bed, 
where the opening may become blocked.

WARNING:

 

This appliance has hot and arcing or sparking parts 

inside. Do not use it in areas where gasoline, paint or flammable 
liquids are used or stored. This fireplace should not be used as a 
drying rack for clothing. Do not hang Christmas stockings or other 
decorations on or near this product.

WARNING:

 

Use this appliance only as described in the manual. 

Any other use not recommended by the manufacturer may cause 
fire, electric shock or injury to persons.

WARNING: 

This heater is not intended for use in bathrooms, 

laundry areas and similar indoor locations. Never locate this 
appliance where it may fall into a bathtub or other water container.

WARNING:

 This appliance is not a toy.  Supervise children 

playing near it.

WARNING:

 

This appliance is hot when in use. To avoid 

burns, do not touch hot surfaces with bare skin. If provided, 
use handles when moving this appliance. Keep combustible 
materials, such as furniture, pillows, bedding, papers, clothes 
and curtains at least 3 ft. (0.9 m) from the front of this appliance.

WARNING:

 

This heater may include a visual alarm to warn 

that parts of the heater are getting excessively hot. If the 
alarm flashes immediately turn the heater off and inspect for 
any objects on or adjacent to the heater that may cause high 
temperatures. 
DO NOT OPERATE THE HEATER WITH THE ALARM FLASHING!

CAUTION:

 Never leave the heater operating unattended.  

Extreme caution is necessary if unsupervised children or  invalids 
are nearby.

CAUTION:

 Before assembly, carefully use scissors or a utility 

knife to cut and unwrap all parts.  Make sure you do not discard 
the hardware.

Содержание WESTCLIFF























Отзывы: