Home Decorators Collection WH100-23I2D-R, Инструкция по использованию и уходу

Страница: 7 / 12

7 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Operation (continued)
□ To unlock the flame function, press and hold the flame button (5) for five seconds. The log lights flash several times and then both
flame lights and log lights turn on.
6
Using the main power button
□
Press the power button (6) to turn the fireplace/heater unit on and off. Press the power button (6) once to turn the unit on. Press
again to turn the unit off.
7
Using the Demo Mode
□ For Use in Retail Store
□ To turn Demo Mode on, press and hold the timer button (3) for 10 seconds until the display (1) shows "00". Demo Mode
deactivates the heater and all front control panel buttons except the flame control button. To turn Demo Mode off, press and hold
the timer button (3) for 10 seconds until the display (1) shows "L4". This fireplace is shipped with Demo Mode turned off for
normal customer usage.
Using the Remote Control
1
Installing the battery
For replacement batteries, use AAA batteries.
□ Press down and slide back cover off the battery compartment.
□ Insert two provided AAA batteries into the battery
compartment making sure that the ends of the batteries
with the negative (-) symbols are against the springs in
the battery compartment.
□
Replace the battery compartment cover, making sure it
snaps into position.
□ Turn the remote over and aim it towards the fireplace/heater unit.
□ Press the power button on the upper left, and see if the flames on the fireplace/heater turn on or off.
□ If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
OPEN CLOSE
1
5
6