6
Operation (continued)
4
Using the heater control
NOTE:
The heater default temperature is set to 82 degrees Fahrenheit. If your ambient room temperature is above 82 degrees, then
your heater will automatically shut off after few minutes. Adjust your heater thermostat (see below) to a higher temperature in order to
keep your heater ON above 82 degrees.
□
Pressing the heater button (4) will turn on or off the heat and set the temperature in the thermostat. If you turn off the heater by
the main power button (6), the unit will hold your preferred temperature setting in the memory. When the power is turned back
on, the heater will turn on at the same setting. There is no speed setting for the heater blower.
□
To convert from Fahrenheit to Celsius:
With the heater on, press and release the heater button (4) so that the display (1) and
LED function indicator (2) lights turn on (if they are not already on). Then gently press and hold the main power button (6) for five
seconds to enter temperature converting mode. The LED indicator flashes five times in red color then changes to green. Green
indicates Celsius mode, and Red indicates Fahrenheit mode. In this converting mode, the display (1) flashes. Repeat the same
process to convert Celsius temperature into Fahrenheit temperature.
□
To set the thermostat temperature:
Press the heater button multiple times to cycle through the temperature settings, starting
at 82°F down to 62°F, then Always OFF or Always ON. (27°C - 17°C - OFF - ON). After you release the heater button, your preferred
setting will be flashing. Once it stops flashing, and the display goes dark, then the thermostat will be set at your preference (and
kept in memory). Note that the "ON" setting keeps the heater always on until the user powers off the unit or the safety sensor
turns off the heater to prevent overheating.
□
To turn OFF the Heater while keeping the Flames ON:
Press the heater button until you see "OF" in the Control Panel display
(1). This indicates the Heater is "OFF". Flame settings and other features continue to operate as normal.
□
Heater Lock (safety feature):
To lock the heating function in the OFF position, with the main power button on, press and hold
the heater button (4) for ten seconds. The log lights flash several times to indicate that the heater function is locked. In this mode, there
is no heating function but only glowing logs and normal flame control operation.
□
To unlock the heating function, press and hold the heater button (4) for ten seconds. The log lights flash several times and then
normal heating function mode is turned on.
NOTE:
After the heater function or power is shutoff the blower will continue to run for several minutes to cool the internal
components.
5
Using the flame control
□
Press the flame button (5) to set the flames for different levels of flame brightness. These flame levels are shown in the display
(1). The flame settings are as follows:
Button Press
Flame Level
Display Value
Fireplace Appearance
1st press
High
L4
Flames Highest, Logs Glow Highest
2nd press
Medium
L3
Flames Medium, Logs Glow Medium
3rd press
Low
L2
Flames Low, Logs Glow Low
4th press
Flames Off
L1
Flames Off, Logs Glow Highest
5th press
All Off
None
Flames Off, Logs Off
□
Regardless of the previous flame setting, when powered off by the main power button, the flames will come on in L4 mode (High)
when you turn the heater on.
□
Log Glow Mode: To lock the flame function in the OFF position, with the flame in L4 mode, press and hold the flame button (5) for
five seconds. The log lights flash several times to indicate that the flame function is locked. In this mode, there are no flames but
only glowing logs. Pressing the flame button in sequence will set the logs for different levels of log brightness. The logs brightness
levels are shown in the display (1). The logs settings are as follows:
Button Press
Flame Level
Display Value
Fireplace Appearance
1st press
Flames Off
L4
Logs Glow Brightest
2nd press
Flames Off
L3
Logs Glow Medium
3rd press
Flames Off
L2
Logs Glow Low
4th press
Flames Off
L1
Logs Glow Brightest
5th press
All Off
None
Logs Off
Содержание WH100-23I2D-R
Страница 11: ......
